SUPERPOND

MANIFOLDS

BATTERY

AIR PUMPS

SUPERPOND

AIR PUMPS

LINEAR

AIR PUMPS

AIR 

STONES

AIR

TUBING 

SPA

BLOWERS

CARBON

VANE BLOWERS

AIR

MANIFOLDS

DIAPHRAGM

COMPRESSORS

POND BACKUP POWER SYSTEMS

    

AIR COMPRESSORS, AIR PUMPS, AIR STONES, AIR SYSTEMS, ETC

Technical Help / Orders (509)-586-1945  

Orders only 509-586-1945

NOW, ORDER IN TIME FOR SPRING POND WORK! 1 AIR PUMP, 10%OFF, 2 AIR PUMPS, 15% OFF, 

 "THE QUIET AIR PUMP THAT SAVES FISH, CLEANS YOUR POND AND KEEPS IT HEALTH" 

SEE SUPERFALLS WATER PUMPS FOR SPRING POND WORK ALSO!

SUPERFALLS CAN "SAVE Y0U THOUSANDS!" 

    SEE POND PUMPS FOR FIRE PROTECTION

 

 
 
 
KOI JOY's POND SHOP

422 East Columbia Drive

Kennewick Wa. 9933

 

 New! Air Disk Stations Now - SuperPond Air Drains for Cleaner Water! New! Weighted Sinking Air Tubing

Linear Air Compressors

Diaphragm Compressors

Air Control Manifolds

Spa Air Blowers

Carbon Vane Compressors

Air Stones, Hose, and Tubing

Pipe and Tubing Cutter Hose Clamps

Emergency Air, Filtration & Circulation System for Ponds

       

Pond FAQS: "How can I benefit from an air pump?"

 One of the best things that you can do to assure a healthy pond for your fish, is to install and use continuous air from an air pump. Use one of our linear air pumps below, with several air stones or SuperPond air hose to saturate the water with air. 

1.    Your biological filter stores vast quantities of  bacteria to digest organic solids and convert waste into harmless byproducts. Higher Oxygen content in water going into the filter increases biological filter  performance dramatically. Your filter works better, and your water will be more clear. 

2.    Extra air flow via air diffusers or air stones increases the count level of beneficial bacteria, helping to crowd out harmful bacteria, reducing health problems for ponds and aquaculture systems. Products like Microbe Lift and LymnoZyme work best when concentrations are at high levels. Both of these bacteria sources will reach higher levels of concentration and thus perform better at high Oxygen levels in the pond or tank.

3.    Higher levels of bacteria compete better with algae for the same foods, thus reducing algae levels and increasing water clarity.

4.    Higher dissolved oxygen levels reduces and prevents fish losses associated with over crowding conditions. With high Oxygen levels in ponds and tanks, it is possible to increase fish populations dramatically. While this is not necessarily wise to do, it does point out that higher levels of dissolved Oxygen can accomplish some of the same benefits of increasing the pond size. This is one of the methods used in intensive fish aquaculture to maximize efficiency of harvest.

5.    This same air pump provides maximum aeration for winter fish protection, even under icing conditions. Adding air directly to the pond in the winter is considered better than attempting to maintain a hole open in the ice to allow air adsorption.

6.    Air columns from the rising air draw bottom water and waste to the top, increasing decomposition the Oxygen rich water and improving performance of filter systems. This improves water quality and fish health dramatically by "flushing" methane gas and carbon dioxide up out of the water. At the same time, the upward air column flow breaks up and reduces  buildup of bottom "muck" which often leads to disease, odor, and fish kills.

"One winter I installed such a system for aeration, and left it running into the following spring and through that summer . I soon noticed that my fish losses had dropped to zero during the whole year, even though all experts would say that my pond was overcrowded. I have kept my air pump and stones running ever since and attribute my success to the higher oxygen levels, and the high beneficial bacteria levels, which results in less disease and greater water purity." DM 

SUPERPOND LINEAR and DIAPHRAGM AIR COMPRESSORS

New!  

Now new lower prices on SuperPond air pumps! Our prices are now lower than other linear air pumps!

                               

01-DBL15A

01-DBL040A

01-DBL150

 The SuperPond linear air pumps are the best choice for a continuous and long operating industrial duty indoor/outdoor air compressor. These compressors are designed for efficiency and can use as little as 1/10 of the electricity as other air compressors and are super quiet. The smallest two models, the 01-DBL08A and the 01-DBL15A are capable of a minimum of 35,000 hours of service free life, while the next larger models,01-DBL030A, 01-DBL040A,  01-DBL60L and the 01-DBL80L, offer capabilities of 25,000 hours of service free life. Use either of these compressors for high flows to greater depths in deep ponds. Our Largest air pumps, the 01-DBL120 and the 01-DBL150 are for very large ponds or very deep ponds where many air stones are required. With flows of 6 to 7 CFM, and usable depths of 10 to 12 feet, these are among the largest Linear air pumps available. All of these linear air compressors are industrial grade products with high flow and operate very quietly. The 01-DBL15A has an output of .60 cfm @ 1 psi or approximately 2 1/2 ft depth. The 01-DBL40A model has a flow of 2.4 cfm @ 1 psi or approximately 2 1/2 ft depth.. The 01-DBL80L model has a flow of 3.3 cfm @ 1 psi or approximately 2 1/2 ft depth and can easily supply air to several air stones at 10 ft of depth (see below). One year warranty for steady air flow with continuous duty. Service replaceable rubber diaphragms. All of the below air compressors can be run on 115V/230V or 50/60 HZ. 

Choose from the manifolds below, to distribute your air through the tubing to your air stones.

Note: 1cfm (cubic foot per minute) of air flow could operate one of our 12" air stones, or two 6" air stones, or up to four 3" air stones. 2 cfm would allow use of double that number of air stones. To properly use the chart below, first determine depth of your pond and the air stones, then look across the chart to determine the air pump which provides the required air flow in cfm. We recommend that you purchase a manifold for ease of stringing the tubing and number of air stones that you need for your pond. Use the air pumps cfm output at your depth, to order the required number of air stones (1 cfm = 12 inches of air stones).

LOW NOISE LINEAR AIR PUMPS (INDOOR/OUTDOOR MODELS)

Model Watts CFM @ 2.5 ft Max Press PSI Tubing Size cfm/Air Stones @ 2.5 ft cfm/Air Stones @ 5 ft cfm/Air Stones @ 10 ft Wt. Lb. Cost
01-DBL08A 9 0.33 2.6 .33cfm NA NA 2.2 $189.99
01-DBL15A 19 0.60 3.0 1/4 IN 0.60cfm  (9"stone) 0.33cfm 3" NA 2.2 $199.99
01-DBL40A 47 2.4 6.1 1/4 IN 1.9cfm 24" 2.0cfm 24" NA 6.4 $299.99
01-DBL80L 90 3.3 7.8 3/8 IN 3.4cfm 36"  2.5cfm 30" 1.8cfm 18" 13.5 $399.99
01-DB120L 95 5.2 6.5 3/8 IN 6.2 CFM 48" 5.2 CFM 36" 2.7 CFM 30" 25 $699.99
01-DB150L 118 6.0 6.8 3/8 IN 7.2 CFM 48-60" 6.3 CFM 48" 3.5 CFM 40" 25 $799.99
 

INDOOR AIR PUMPS (NOT WEATHER PROTECTED)

Use these SuperPond diaphragm air pumps when weather protection is not a concern. These excellent air pumps are lower cost, yet perform with close to the same output as their Linear counterparts above. These air pumps must be protected against weather conditions. Without the sound proofing case, they are not as quiet as the linear compressors, but do have their place for indoor fish tanks or in protected conditions and locations outdoors.

Choose from the manifolds below, to distribute your air through the tubing to your air stones.

Note: 1cfm (cubic foot per minute) of air flow could operate one of our 12" air stones, or two 6" air stones, or up to four 3" air stones. 2 cfm would allow use of double that number of air stones. To properly use the chart below, first determine depth of your pond and the air stones, then look across the chart to determine the air pump which provides the required air flow in cfm. We recommend that you purchase a manifold for ease of stringing the tubing and number of air stones that you need for your pond. Use the air pumps cfm output at your depth, to order the required number of air stones (1 cfm = 12 inches of air stones).

 

LOW COST DIAPHRAGM AIR PUMPS (INDOOR MODELS ONLY)

Model Watts CFM @ 2.5 ft Tubing Size Air Stones @ 2.5 ft Air Stones @ 5 ft Air Stones @ 10 ft Wt Lb. Cost
01-DBD008 9 0.33   (1) 5" NA  NA  5 $79.999
01-DBD015 19 .75 1/4 IN (3) 3"

or (1) 9"

(1) 6" NA 5 $151.99
01-DBD040 47 1.8 1/4 IN (2) 12" or (3) 6" (3) 6" or (2) 9" NA   $219.99
 

 

SUPERPOND AIR DISTRIBUTION MANIFOLDS
 

BR6316, BR8316, BR10316 shown 

SUPERPOND Air Manifolds

SUPERPOND air manifolds offer a simple way to valve air in or out to as many air stones as your air compressor can feed. Our manifolds are unique in their low cost, number of valves, and the 3 sizes of valves and barbed fittings you can choose from. These tubes are threaded to fit 1/2 inch brass or plastic plugs, barbed fittings, or couplers to allow one air pump to supply multiple manifolds located around your pond, tanks, etc. Our manifolds are offered in 3/16 inch barbed valve size, 1/4 inch barbed valve size, and 3/8 inch barbed valve size. Purchase tubing to fit the barbed valve.

 

BCT12, PR8316, PR10316 shown

Brass Tube and Fittings (3/16 inch barbs)

NOTE: Manifolds come standard with one outlet plug and one inlet 1/2" barbed nipple. Order other fittings as required.

Plastic Tube with Brass Fittings (3/16 inch barbs)

PL812- SuperPond 8 Valve Plastic Air Disk Manifold Shown above

SUPERPOND Air Disk Manifolds

SUPERPOND air disk manifolds offer a simple way to valve air in or out to as many air stones as your air compressor can feed. Our manifolds are unique in their low cost, number of 1/2" ball valves, and the 2 sizes of manifolds you can choose from. These tubes are threaded to fit 1/2 inch brass barbed fittings, or couplers to allow one air pump to supply one or more air stations located on the bottom of your large pond, lake, etc. Manifold is supplied with one 1/2" plug for one end and we can supply you with a 1/2" barbed fitting on the other end. 

 Purchase 1/2" weighted tubing to fit the barbed valves.

RECT10-2

CAT # ITEM SIZE  TUBING COST
BR6316 6 Valve Brass Manifold 3/16 inch barbs 3/16 inch $30
PL6316 6 Valve Plastic Manifold 3/16 inch barbs 3/16 inch $25
BR8316 8 Valve Brass Manifold 3/16 inch barbs 3/16 inch $33
PL8316 8 Valve Plastic Manifold 3/16 inch barbs 3/16 inch $28
BR10316 10 Valve Brass Manifold 3/16 inch barbs 3/16 inch $36
PL10316 10 Valve Plastic Manifold 3/16 inch barbs 3/16 inch $31
BR414 4 Valve Brass Manifold 1/4 inch barbs 1/4 inch $73
PL414 4 Valve Plastic Manifold 1/4 inch barbs 1/4 inch $60
BR438 4 Valve Brass Manifold 3/8 inch barbs 3/8 inch  $76
PL438 4 Valve Plastic Manifold 3/8 inch barbs 3/8 inch  $63
PL412 New! 4 Valve Plastic Air Disk Manifold 1/2 inch barbs 1/2 inch  $79
PL812 New! 8 Valve Plastic Air Disk Manifold 1/2 inch barbs 1/2 inch  $105
 EXTRA FITTINGS and CONNECTORS
CAT# Description, Size Size Cost
BR1214 Brass barbed fitting, 1/2 inch threads by 1/4 inch barb 1/4 inch barb $4.50
BR1238 Brass barbed fitting, 1/2 inch threads by 3/8 inch barb 3/8 inch barb $4 ea.
BR1212 Brass barbed fitting, 1/2 inch threads by 1/2 inch barb 1/2 inch barb $4 ea.
BR1234 Brass barbed fitting,1/2 inch threads by 3/4 inch barb 3/4 inch $4.50 ea.
BPP12 Brass Pipe plug, 1/2 inch, (one furnished with manifold) 1/2 inch $4.10
PL1214 Plastic barbed fitting, 1/2 inch threads by 1/4 inch barb 1/4 inch barb $3.00
PL1238 Plastic barbed fitting, 1/2 inch threads by 3/8 inch barb 3/8 inch barb $3 ea.
PL1212 Plastic barbed fitting, 1/2 inch threads by 1/2 inch barb 1/2 inch barb $3 ea.
PL1234 Plastic barbed fitting, 1/2 inch threads by 3/4 inch barb 3/4 inch $3.50 ea.
BCT12 Brass threaded nipple, close, connects two manifolds 1/2 inch $3 ea.
VP316 Brass pipe valve - can be threaded into pvc or brass pipe 3/16 inch $4 ea.
VP014 Brass pipe valve- can be threaded into pvc or brass pipe 1/4 inch $15 ea.
VP038 Brass pipe valve- can be threaded into pvc or brass pipe 3/8 inch $16 ea.
 

 

CARBON VANE COMPRESSORS

 These industrial duty compressors/blowers are ideas when you need a lot of air continuously or for long periods of time. Carbon vane compressors are a really an oil less rotary pump with easily replaced vanes. These would be an excellent choice as an aeration supply for large scale, emergency or continuous duty requirements. Use to supply continuous air for large ponds, lakes, or aquaculture operations. Rotary vane compressors can put out 4-6 cfm air at depths of 10-20 ft. Use 6" - 12" air stones listed below to aerate large ponds or lakes. Several stones located in center of deep lake will set up recirculation patterns to aerate whole lake if set up properly.

These heavy-duty work horses are available in 1/3 hp or 3/4 hp models, 115 volt, with muffler (all carbon vane air compressors make noise) and mounting base included. No cords are provide with these compressors. The carbon vanes will last from 9 to 18 months depending on operating pressure.

Now you can protect your valuable Koi and you other sensitive household property with our PUPS system for ponds and households. This system consists of a battery backup system with its own battery bank (or your own), an inverter to convert the battery's 12 volt DC to 115 volt AC to operate equipment for as long as possible with your backup battery source. This system is normally provided with our pond aeration system which is capable of aerating your pond, circulating the ponds water, removing ammonia as it is formed, even without a biological filter in service. Our PUPS system aerates your pond and thus maintains winter protection of the pond, even when electrical power is off to the block!

 

Order the larger of the manifolds above, ie. the BR438 or the PL438 to distribute your air to your air stones.
 

Model Power, Weight Air Flow

@ 5 FT

Air Flow

@10 FT

Cost
01-CV0523 1/3 hp, 250 Watts, 30 lbs 2.8 CFM 2.4 CFM $440.99
01-CV0823 3/4 hp, 560 Watts, 47 lbs 7.8 CFM 7.6 CFM $667.99
01-CV1023 3/4 hp, 560 Watts, 52 lbs 9.9 CFM 9.6 CFM $674.99
01-CVK478 set replacement carbon vanes for 01-CV0523     $55.00
01-CVK479 set replacement carbon vanes for 01-CV0823 or 01-CV1023     $65.00

 

SPA AIR BLOWERS

Offered in 3 sizes, our spa blowers are ideal for backwashing filters. Install an under-gravel air manifold with 1/16" drilled holes into the filter before filling with gravel (see our BALANCE gravel in filtration section). Greatly simplifies the job of backwashing filters (practically impossible to clean gravel filters without these). A 1 hp blower is usually satisfactory for backwashing a filter bed of 35 - 40 ft2 area and under 30 in. of water. Space air pipes 6-10 inches apart with drilled 1/16 inch holes spaced on both sides of pvc pipe so that you have enough surface area (cross sectional area of holes) to total about 2 inches area or 1,000 holes (use more holes, larger blower for larger filters, or larger blowers for greater depths). See air grid instructions in box below.
 

01-SB0100 1 hp 50 CFM @ 33" Water, Max. 60" $139.99
01-SB1500 1 1/2 hp 50 CFM @ 40" Water, Max. 85" $159.99
01-SB0200 2 hp 50 CFM @ 45" Water, Max. 100" $189.99

 

BUILD AN AIR BACKWASH SYSTEM
1. Start with a 2" line above the filter which will allow connection to a backwash blower. This pipe goes down to the bottom of the filter where it connects to a "T". Each side of the "T" is reduced to 1 1/2". 

2. Assemble enough 1 1/2" and fittings to create a border around the bottom of filter or pond. The border can be 3" smaller than the filter all the way around it. Lay out enough 1" pipe to reach from one end of manifold to other, every 6". At each of these points you will later glue a 1 1/2" X 1 1/2" X 1" "T". This will form your air grid. The maximum size of this air grid depends upon the depth, the power of your backwash blower, etc. (a 1 hp blower can easily take care of 40 ft2 of grid, in 30" - 36" water). If necessary, build multiple air grids.

3. Drill 1/16" holes each 3" along both sides of all 1 1/2" and 1" pipe and fittings to be used to construct manifold and grid.

4. Using 1 1/2 " pipe, 1 1/2 by 1" "T"s, glue the manifold together. There should be enough 1/16" holes drilled to pass the full flow of the air blower or 1,000 - 3,000 holes depending upon volume of air blower can supply. If necessary to increase number of holes, place closer together. Install air grid beneath slotted pipe. Good Luck.

   

  AIR DISK STATIONS AND WEIGHTED TUBING 

        

New! RND12-1

New! RECT10-1

New! RECT10-2

New! RECT10-4

Air Disk Stations and Air Disks SuperPond now has the best selection of air disks to aerate your pond or lake. We have two models of single air stations, the rectangular Air box, 10" or 121/2", or the Round Air Disk Station, 10" or 12.5" also. We also have the replacement disks to replace damaged disks or to allow you to assemble your own equipment.

Technical Data

 SPAD-10

 SPAD-125

Material:

-Membrane with precision holes.

-Support dish

High grade EPDM

ABS

High grade EPDM

ABS

Diameter

 10 ( 250mm)

 12.5 (320mm)

 Size of bubble

 1-3mm

 1-3mm

 Connection

 R3/4”PT

 R3/4”PT

 Air flow

-Best continuous operation

1.0-2.5 cfm

1.8-3.5 cfm

 Operation temperature range

  0 ~ +100蚓

 0.~ +100蚓

 Effective diffusion area

 66 inch ( 0.043m)

  106 inch( 0.068m)

 

 

 

 

 

 

 

SuperPond offers the most complete selection of membrane air diffuser assemblies available. The SuperPond Air Stations features a hollow base (available either round or rectangular) that can be filled with pea gravel or sand.  This solves all of the problems with attempting to hide floating air tubes, or pvc pipe!  Available in single head units, dual head stations, or even quad head stations, you can now easily aerate any size of pond or lake. A 3/4" female threaded outlet is located in the base of each diffuser, then mounted securely onto the box.  A 3/4" x 1/2" poly barbed adapter is included (non-weighted tubing).

Cat # Description Size

CFM FLOW

Cost
RND10-1 * Round air disk station, 10" disk  10" disk 1-2.5 CFM $126.99
RND12-1 * Round air disk station, 12 1/2" disk  12 1/2" disk 1-3.5 CFM $144.99
RECT10-1 Rectangular air disk station, 10" disk  10" disk 1-2.5 CFM $126.99
RECT12-1 Rectangular air disk station, 12 1/2" disk  12 1/2" disk 1-3.5 CFM $144.99
RECT10-2 Rectangular air disk station, two 10" disks  10" disk 2-5 CFM $172.99
RECT12-2 Rectangular air disk station, two 12 1/2" disks  12 1/2" disk 2-7 CFM $208.99
RECT10-4 Rectangular air disk station, four 10" disks  10" disk 4-10 CFM $236.99
RECT12-4 Rectangular air disk station, four 12 1/2" disks  12 1/2" disk 4-14 CFM $308.99
AD10 Replacement or Single Air Disk, 10" 10" 1-2.5 CFM $63
AD12 Replacement or Single Air Disk, 12 1/2" 12 1/2" 1-3.5 CFM $81

* These air disk stations will replace Tetra Bottom Drain domes to convert your bottom drain into an air station drain!

  Air Station Package includes Station, weighted Tube, Manifold, Air pump.  

Save Dollars!

  10% off Total!

 

New! 01-24AT and 01-12AT

New! 01-PL812

New! Black Weighted Air Tube

 

Cat # Description Size Cost  AIR FLOW AT SURFACE
01-24AT  24" Perforated air tube, shown with barbed fitting  24" long, 2" Diameter $135

7.5 CFM

01-12AT 12" Perforated air tube, shown with barbed fitting 12" long, 2" Diameter $95

3.5 CFM

PL412

4 Valve Plastic Air Disk Manifold 1/2 inch barbs  $79  
PL812 8 Valve Plastic Air Disk Manifold 1/2 inch barbs $105  

New

 

 

 

03-BAD12

Our new SuperPond 4" Aerating Bottom Drain, 03-BAD12, has features not available on other bottom drains. You can install it now into a 4" or 3" PVC pipe, and hook up the air hose to the barbed fitting when you are building your pond. Liner is sandwiched between the flange (supplied) and the bottom half of the unit to make your drain watertight. 

Why do I need an Aerating Bottom Drain? First, the rising air column from your BAD10 or 12 entrains a tremendous amount of water with it, which means that as the water rises to the surface with the air, it has to be replaced from the pond water around it. This creates a current of water moving across the bottom of the pond towards the drain, dragging dead algae, fish waste, leaves, etc. into the drain for removal. This of course means ultimately you will be rewarded with a cleaner, clearer, healthier and odor free pond.

      You can even add air to your existing Tetra bottom drain if desired by replacing your Tetra Bottom drains' dome with the RND10-1 or RND12-1 air stations. Power your air pump with a timer or solar switch to aerate your pond during the night, the time that your fish are most in need of air and when plants give of CO2 instead of air. 

 

 

03-BAD10

03-BAD12

New

Now!  SuperPond 4" Pond Drain with Air Dome, 10" or 12"

Helps to keep your pond clean, and clear*. Makes your bottom drain work better. Our new Bottom Drain can be fitted to 4", 3", or even 2" by using couplers at time of installation.

order 4 x 4 coupler, 4 x 3 coupler, or 4 x 2 coupler, your choice, comes with 1/2" barb, easily adjustable to 1/4", 3/4", etc.

Order with 10" air dome  or 12" air dome,

10" Dome $349.99 

12" Dome $369.99

 

AIR DIFFUSERS STONES AND TUBING

We offer the highest quality air stones available for your emergency air supply and continuous duty use. These stones will supply your air needs from 1/2 cfm to 8 cfm and are very reasonably priced. Choose tubing from selection below. Larger sizes tubing fit various pumps in pump section of this catalog.
 

Air Stones
01-FSD150 Air Stone 1.5 X 1.5 block (3/16" hose) $8.99 ea.
01-FSD300 Air Stone 1.5 X 3" block (1/4" hose) $14.99 ea.
01-FSD600 Air Stone 1.5 X 6" block (1/4" hose) $18.99 ea.
01-FDS612 Air Stone 1.5 X 6" block (1/2" hose) $20.99 ea.
01-FSD900 Air Stone 1.5 x 9'' block (3/8'' hose) $35.99 ea.
01-FSD912 Air Stone 1.5 x 9'' block (1/2'' hose) $38.99 ea.
01-FSD120 Air Stone 1.5 X 12" block (3/8" hose) $40.99 ea.
01-FSD1212 Air Stone 1.5 X 12" block (1/2" hose) $45.99 ea.
Air Tubing
01-AH0018 Air Tubing 1/8"ID $0.19/ft
01-AH0316 Air Tubing 3/16"ID Use for 3/16 inch manifolds above $0.24/ft
01-AH0025 Air Tubing 1/4" ID Use for 1/4 inch manifolds and valves $0.29/ft
01-AH0038 Air Tubing 3/8" ID Use for 3/8 inch manifolds and valves $0.36/ft
01-AH0050 Air Tubing 1/2" ID  $0.49/ft
01-AH0058 Air Tubing 5/8'' ID $0.60/ft
01-AH0034 Air Tubing 3/4"ID  $1.25/ft
01-AH1000 Air Tubing 1" ID  $1.89/ft
01-AH0125 Air Tubing 1-1/4'' ID $3.29/ft

 

  BLACK VINYL TUBING 

   This exceptional line of black tubing is recommended for use in water gardening, as it is practically invisible underwater. Sunlight will not penetrate it, so algae growth is inhibited inside. Constructed of flexible, plasticized polyvinyl chloride (PVC). Fish Safe.

 

01-BLKVT34 3/4'' I.D. Black Vinyl Tubing $.99 per ft. 100ft. roll $99.00
01-BLKVT100 1'' I.D. Black Vinyl Tubing $1.89 per ft. 100ft roll $189.00
01-BLKVT125 1-1/4''I.D. Black Vinyl Tubing $2.29 per ft. 50ft roll $114.50

 

 

 

  BLACK WEIGHTED SINKING AIR TUBING 

    

This exceptional line of black weighted tubing is recommended for large ponds, lakes, or any body of water which requires use of our air disk stations, or air stones for aeration. The black tube stays on the bottom, and because it is black, it is essentially invisible. Sunlight will not penetrate it, so algae growth is inhibited inside. Constructed of flexible, plasticized polyvinyl chloride (PVC). Fish Safe. Use 1/2" ID tube for the connections on our SuperPond Air Stations, and use the 3/4" SuperPond air tube for mainlines which carry the air flow across the bottom of the lake.

01-BLKWT38 3/8'' I.D. Black Weighted Tubing $2.55 per ft. 100 ft. roll $245.00
01-BLKWT12 1/2''I.D. Black Weighted Tubing $2.99 per ft. 100 ft roll $289.00
01-BLKWT58 5/8"' I.D. Black Weighted Tubing $3.43 per ft. 100 ft. roll $334.00
01-BLKWT34 3/4''' I.D. Black Weighted Tubing $3.60 per ft. 100 ft roll $355.00

 

 

 

 

  PIPE AND TUBING CUTTER 

Cutting PVC has never been easier. Stainless-steel blades with glass-filled nylon handles make cutting fast, safe, and easy. "The Cutter" provides a clean cut with no residue or burrs. Cuts up to 2" of PVC or flex tubing.

01-HOSECUT pipe and tubing cutter  $22.50

 

  HOSE CLAMPS

  The band, housing, and screw of these  hose clamps are manufactured of 100% Marine-grade 304 stainless steel.  Available in  hassle-free hand-tighten with triangular head.

01-CL1438

1/4" to 3/8" tubing $.58
01-CL3812 3/8" to 1/2" tubing $1.00
01-CL5801 5/8" to 1" tubing $1.05
01-CL1112 1" to 11/2" tubing $1.15

 

AIR COMPRESSOR TYPES AND THEIR USES

 

LINEAR- Low to medium volume (1/2 to 8 cfm), greater depth, higher rate of aeration, more air stones, quiet, energy efficient operation. Longer life, Continuous duty.

DIAPHRAGM- Low volume (1/2 to 1.5 cfm), not as quiet, energy efficient operation, typically shorter lived, continuous duty

  ROTARY VANE- High air flow (4-6 cfm) at greater depths (10-20 ft), maintenance free operation, easy vane replacement. For a serious air supply! Continuous duty. 

SPA BLOWER- Use for high air flow( 30 - 60 cfm) at shallow depths ( 24 inches to 48 inches), intermittent duty, low cost, high noise, for backwashing filter gravels. Intermittent use.

Consultation / Technical Help (509)-586-1945  

Orders only 1-800-497-3627 24 hours a day

 

FLIP THROUGH OUR CATALOG PAGES BELOW  

Catalog 

Important Reference and other Neat Stuff!

 

About KOI JOY & THE POND SHOP |  Copyright 1996

AIR COMPRESSORS

  Top of Page