"AMERICAS #1 PUMP SUPPLIER"

"A-"

KJ11OOOLHC

Click Above for Available SuperFalls Pump Models

Technical Help / Orders (509)-586-1945  

Orders only 1-800-497-3627,  24 hours a day

422 East Columbia Drive

Kennewick Wa. 99336

  MORE ABOUT

  SUPERFALLS PUMPS:

KOI JOY'S "SUPERPOND" 1 INCH MANIFOLDS for PUMP SUCTION AND DISCHARGE

Use these manifolds with the appropriate barbed male adapters for the perfect way to direct water from a submersible pump to several different locations. Connect the pump to a barbed male adapter (screw it onto the right side of the manifolds shown) and then direct the flow to several different fountains through additional barbed male adapters screwed into the different ports at the bottom of each manifold shown below. You can even screw ball valves into the ports to control the flow into each of the barbed male adapter screwed into them. 

KOI JOY'S "SUPERPOND" 2 INCH MANIFOLDS for PUMP SUCTION AND DISCHARGE

Now we have made it simple to install manifolds on the suction and the discharge of your centrifugal pumps! Now you can easily install manifolds on the suction of your pump for two or three (or more) leaf traps, skimmers, or bottom drains, leading to one or more pumps. Then, you can just as easily install a manifold on your pumps discharge to direct its flow to as many different locations as wanted, ie. filters, uv sterilizers, waterfalls, winter bypasses, etc.

Our small basic manifold, model 10-man230, allows you to assemble all of the manifolds offered below, or you can order the manifold pre-assembled to your specifications. The 10-man230 has one spg port which allows a standard pvc fitting to slip over it, and has three slip fittings for 2" pvc pipe. This allows installation of any of the standard pvc fittings including the ones offered below.

Two of the 10-man230 manifolds can be glued together to form a manifold with 4 slip ports and two spg ports. Place one or more 2" tees between the two manifolds to form additional slip ports as shown in the sample manifolds illustrated below.

10-man230 $22.99 ea. Standard suction or discharge manifold, with one spg and 3 slip ports. Fittings extra.	10-man231-U $30.49 ea. Suction or Discharge manifold with one Unions and 3 suction or discharge ports	10-man242-U $61.48 ea. Suction or Discharge manifold with 4 suction ports or discharge ports	10-man255-2U3T $65.06, 5 ports, 2 unions $74.03 with 3 tail pieces Suction manifold for 2 pumps, with 3 Tailpieces for 3 leaf traps

KOI JOY'S "SUPERFALLS" LOW HEAD AND LOW HEAD PLUS! PUMPS

     PICK THE RIGHT PUMP FOR YOUR POND!

SUPER ENERGY EFFICIENT PUMPS

The Superfalls pumps are your best choice for a centrifugal pump for your pond. Consider the following:  Lower noise levels, lower initial cost, lower energy consumption, 2" inlets and outlets give higher flow rates, and greater energy cost savings... all point to Superfalls as the pump of choice for your next pump! See how much money Superfalls pumps can save you!

SUPERFALLS LOW HEAD CENTRIFUGAL PUMPS: KOI JOY has energy efficient centrifugal pumps available in our exclusive 47 -183 gpm series of Super-Energy-Efficient (low head) pumps. These pumps are extremely energy efficient, with GPA (gallons/amp) efficiency ratings of 20-45. This means that when you select one of our Superfalls pumps for your pond, aquaculture system, lap pool, or any other water recirculating system, you will get the maximum flow possible at the lowest operating cost possible! Our KJ11000LH model draws less current and pumps more water than almost any other pond pump available. And best of all, this model is flow adjustable with the 2 inch flow control valve that comes with the pump! This pump is truly a one pump fits all ponds! Low head pumps such as these are perfect for use from 0-14 ft head and flow can be reduced to make any waterfall look and sound perfect!

SUPERFALLS LOW HEAD PLUS CENTRIFUGAL PUMPS: As great as the low head pumps are, there are some pressures or heights where even the largest model cannot pump. Higher pressure filters such as bead filters, sand filters, and extremely long pipe runs, or high waterfall may call for our KJ9000LHP or even the larger KJ13000LHP models. These energy efficient pumps offer high flow rates with pressures high enough to operate almost any type of bio-filter. For the largest leaf trap available on a pond pump, choose the models such as the KJ9000LHP-T or the KJ13000LHP-T. See flow curve below.

The Tiny Mite has a shut-off head of approx. 20 ft, while the larger models (47 gpm - 183 gpm) have a shut off head of up to18 ft. Used for recirculating water for ponds and operating low head waterfalls, these pumps can't be beat for efficient, quiet, reliable operation.

Our Iron Might pumps are a big hit when you don't necessarily need the biggest pump, and can get by with 1 1/2 inch inlet and outlets. The 10-3000LHC Iron Might puts out almost 3000 gph or 50 gpm flow at 1.3 amps. The pump operates on 115 volts, is supplied with cord and plug, and comes with two 1 1/2'' unions for the inlet and outlet. Large leaf trap 10-LFT6IM is available for this pump. One year warranty on this energy efficient pump.

Power Supply-  The lower flow models of Superfalls LH pumps are wired to run at 115 volts and are supplied with a 6 ft cord and plug. They are so energy efficient that it isn't necessary to run them at 230 volts. Our pumps can be unplugged from the outlet and run on an extension cord (heavy duty) or portable generator, etc. making them always ready for emergency power. Our most efficient 1/4 hp models of Superfalls LH pump, with flows ranging to 183 gpm, can be run on 115 volts or 230 volts.

 Koi Joy's 2-speed medium head pumps are perfect for applications which require higher pressure and flow rates occasionally and lower pressures and flows at other times. A good example is for use with bead filters or Predator Bio-Filters which need higher pressures during the back-wash cycle. See below.

NEW! Pump easily Upgradeable- Only Superfalls LH pumps allow you to upgrade your pump to one of higher or lower flow with a simple conversion. Simply purchase the appropriate new wet end in chart below, loosen 4 bolts on motor, unscrew wet end from motor shaft, and screw on new wet end for new pumping capabilities. Or buy one pump and two different wet ends for two pumps in one! Then keep one wet end for a spare to replace the first when seals need repair - no down time while waiting for your local pump shop or The Pond Shop to change seals (for a small fee, we do replace seals on our pumps if returned to us). Buy the required pump today for your existing pond and if you make it larger later, or add a really big waterfall, upgrade to a larger model and save the old wet end for a backup. For a look at the pump flow curves, check out the information box below.  

 Exclusive feature - Full 360 degree output- Only Superfalls LH pumps can be easily rotated on the motor to allow the pump's discharge to be directed as desired - up, down, left, or right for ease of installation. Properly directed flow reduces resistance, elbows, pipe length, etc. As with conversion above, it only requires that the owner loosen 4 bolts, rotate the pump on the motor, and tighten the bolts.

New more energy efficient, more reliable motor - Our newest 1/4 hp Superfalls pumps use a single motor to power all models of low head pumps - from the smallest KJ3000LHC (1.9 amps at 115 volts or .95 amps at 230 volts), to the most powerful KJ11,000LH (3.7 amps at 115 volts or 1.9 amps at 230 volts). This motor is quiet, permanently lubricated, and more versatile than any other pump/motor combination available today - and it's warranty is for 2 years! Our new motor uses a split phase start system for higher starting torque and a capacitor on the run windings for higher efficiency. The small difference in cost for this new motor can be made up for by energy savings in as little as one month, yet you will benefit in many ways for many years. This special low energy, "does it all motor and pump" is available only from Koi Joy or our dealers!

Newest pumps - SuperFalls Low Head Plus! Waterfall pumps

Use this pump for high flow for high waterfalls and bead filters while saving energy and operating costs.

Superfalls KJ9000LHP-T Waterfall pump shown above
New!  KJ6OOOLHP-T    KJ9OOOLHP-T   KJ13OOOLHP-T KJ27000LHP-T	Higher Flows at higher elevations up to 20-23 ft. Low Head Plus provides high flow rates for waterfalls at high elevations where you used to have to use medium head pumps. Select a Low Head Plus pump anytime your total head loss is more than 14 ft. Flow curves above show flow from pumps with leaf traps. When ordered with out leaf traps, flow increases approx. 15%.

Now you can have that high waterfall and still save money with your energy bills. Our Superfalls Low Head Plus Waterfall pump has unique characteristics not available with any other low head energy efficient pond pump.

Highest shut off head for a low head energy efficient pump! With a shut off head (point of no flow) of 27 ft, you can still have high flow with an energy efficient pump, saving lots of money in operating costs all year long. If you need higher pressure because of a high waterfall or a pressure type of filter such as the Predator, choose one of our Low Head Plus Waterfall pumps.

Largest leaf trap and inlet for higher flows and less trap cleaning! This priming pot has a clear lid and measures almost 15 inches tall and 9 1/2 inches around making this the largest trap available on a pond pump. Our large priming pot or leaf trap and basket have 3-4 times the volume of standard leaf traps which mean less cleaning even under abnormally dirty conditions. The large priming pot on the KJ6000LHP-T and the KJ9000LHP-T models have a 2" inlet and outlet, and after initially filling your system, you don't have to worry about loss of prime. It's built in check valve prevents water from flowing backwards into the pond when power is interrupted. The KJ13,000LHP-T model has a 3" inlet in it's leaf trap and a huge stainless steel basket for highest flows of over 200 gpm when using the leaf trap, or up to 230 gpm without the leaf trap! 

Three year warranty on these pumps makes them an even better buy.

Energy efficient motors and design give you low operating costs when compared to the alternative which would have to be medium head pumps. Energy savings of 50% to 60% possible when substituted for medium or high head (pressure) pumps.

* Maximum amps means that this is the amps to be expected when pump is producing maximum flow rate. When pump is producing less flow, amps and energy used will be reduced also. Expect approx.1/3 less amps when flow is reduced to1/2 of maximum flow. ** Maximum flow under lowest pressure conditions. These pumps would be most energy efficient and useful when used at pressures and heights of 10 to 22 foot total head pressure. See flow curve above.

How much energy (and money) can I save? 

Warranty- All Superfalls pumps are guaranteed to perform as advertised for 2 years from date of purchase (Iron Might pumps have a 1 year warranty). An extended warranty is available from the Pond Shop for those who feel more comfortable with longer warranties for an additional $50 per year. This offer is available at time of original purchase, and must be pre-paid at that time. 
 

20 gpm	10-1200LH Tiny Might puts out 1150 gph or almost 20 gpm flow at 0.9 amps (less than 100 watts) for a GPA of 21.6. The Tiny Might has a 1/16 hp, 115 volt motor with 3' cord. The pump has 1" inlet/outlet ports and also comes furnished with two 1" unions. The Tiny Might even has an optional leaf trap available. The 10-LFT006 fits the Tiny Might and protects the pump against possible damage due to operation with loss of flow.
New! 50 gpm	10-3000LHC Iron Might puts out almost 3000 gph or 50 gpm flow at 1.3 amps. The pump has 1 1/2 '' inlet/outlet ports and comes with two 1 1/2'' unions. 115 volts with cord and plug.
67 gpm	Our Superfalls 10-4000LHC puts out an amazing 4000 gph (67 gpm) at only 2.2 amps (at 1' head)! That is an amazing 28 gpm for every amp (28 GPA) used. These low energy pumps use 1/4 hp motors coupled to our special pumps with large impellers to achieve high flows of 67 gpm. This pump beats the competition in purchase cost and energy savings. This pump has a shutoff head of 14 ft and therefore should be used for low head applications. At 5 ft head, the10-4000LHC will still deliver an amazing 58 gpm at only 2.2 amps. 2" inlets and outlets.
87 gpm	The Superfalls 10-5000LHC is a good pump for ponds to 5000 gallons or to 10,000 gallons when two pumps are used. It puts out an amazing 5000 gph or more than 87 gpm at 1 ft head. 2" inlets and outlets.
100 gpm	The Superfalls 10-6000LHC is ideal for ponds to 6000 gallons or up, and for up to 12000 gallons when two pumps are used. This pump puts out 6000 gph or more than 100 gpm at 1 ft head. 2" inlets and outlets.
115 gpm	The Superfalls 10-7000LHC, with more than 7000 gph or 115 gpm flow rate is perfect for use in high flow, low head water falls or streams and Lap Pools. Use one, two, or more of these pumps for high flow, at low energy consumption in lap pools, swimming pools, waterfalls, etc. This pump has the highest flow of any energy efficient pond pump available today! See pump curves in information box below.
183 gpm	Now available! Newest Superfalls pump, 10-11KLH1 183 GPM  at 3.6 amps, 115 volts (can be wired for 230 volts, 50/60 hz.) Permanently lubricated, 6 ft cord and plug on 115 volt models. 2" inlets and outlets. Also available with 2 1/2" inlet.

Each of the Superfalls LH pumps above (47, 67, 87, 100, or 115 gpm models) can easily be converted to any of the others by simply installing the appropriate new wet end on your Superfalls pump 1/4 hp motor. This allows the owner to quickly replace the wet end when increased flow is needed, seals wear out, etc. Buy your Superfalls pump and extra wet end for less than other energy efficient pumps alone and save 10% on the extra wet end! See pump curves in information box below.

SUPERFALLS LOW HEAD PUMPS - FOR 1-14 FT HEAD PRESSURE
MODEL	HP	AMPS 115v  Approx watts	FLOW @ 1', 3', 5' Flow is reduced by approx 20% at 5 ft head. Shut-off head is 14 -18 ft on all models except Tiny Mites (20 ft shut-off head) and Low Head Plus models (27 ft). Energy consumption (amps) also decreases with reduced flow.	GPA	COST
1200LH	1/16 hp	0.9 amps/104 watts	20 / 17 / 15 gpm, (23 ft shut-off head)	22 GPA	$199.99
3000LHC  Iron Might	1/8 hp	1.3 amps/150 watts 115 volts with cord and plug.	To 50 gpm (15 ft shut-off head)  1 year warranty!	35 GPA	$319.99
KJ4000LHC	1/4 hp	2.2 amps/260 watts	67 / 57 / 50 gpm (13.5 ft shut-off head) 2 year warranty!	30 GPA	$379.99*
KJ5000LHC	1/4 hp	2.4 amps/280 watts	80 / 73 / 67 gpm (14.0 ft shut-off head) 2 year warranty!	36 GPA	$389.99*
KJ6000LHC	1/4 hp	2.6 amps/300 watts	100 / 92 / 85 gpm (14.1 ft shut-off head) 2 year warranty!	38 GPA	$399.99*
KJ7000LHC	1/4 hp	3.1 amps/360 watts	115 / 100/ 90 gpm (14.2 ft shut-off head) 115/230 Volts 2 year warranty!	37 GPA	$409.99*
KJ8000LHC	1/4 hp	3.2 amps/370 watts	133 gpm max flow (18.5 ft shut-off head) 115/230 Volts. 2 year warranty!	41 GPA	$419.99*
KJ9000LHC	1/4 hp	3.4 amps/395 watts	150 gpm max flow (18.5 ft shut-off head) 115/230 Volts. 2 year warranty!	43 GPA	$429.99*
KJ10000LHC	1/4 hp	3.5 amps/403 watts	167 gpm max flow (18.5 ft shut-off head) 115/230 Volts. 2 year warranty!	44 GPA	$439.99*
KJ11000LHC	1/4 hp	3.6 amps/415 watts	183 gpm max flow (18.5 ft shut-off head) 115/230 Volts. 2 year warranty!	45 GPA	$449.99*
All models from KJ4000LH to KJ11000LH can be ordered with A.O.Smith 1/4 hp motor
SUPERFALLS LOW HEAD PLUS PUMPS
New!  KJ9000LHP		8 amps at 115V / 4 amps at 230V	Low Head Plus! Higher shut off head of 27 ft offers higher than normal flow while still using less energy! 2" inlet and outlet. 100 gpm at 15 ft! 3 year warranty!	N/A	$825.28
New! KJ13000LHP		14 amps at 115V / 7 amps at 230V	Low Head Plus! Shut off head of 27 ft allows use at higher than normal head while still using less energy! 2" inlet and outlet. 155 gpm at 15 ft! 3 year warranty!	N/A	$1098.99
New!  KJ9000LHPT		8 amps at 115V / 4 amps at 230V	Low Head Plus! Higher shut off head of 27 ft offers higher than normal flow while still using less energy! Built-in Giant leaf trap. 90 gpm at 15 ft! 3 year warranty!	N/A	$919.28
New! KJ13000LHPT		14 amps at 115V / 7 amps at 230V	Low Head Plus! Shut off head of 27 ft allows use at higher than normal head while still using less energy! Larger than normal built-in Giant leaf trap with 3" inlet. 145 gpm at 15 ft! 3 year warranty!	N/A	$1411.86
KJ27000LHP (6''in 4''out)	3HP Low Head Plus	No	38/19 amps	27,000 @ 6' Head	$4315.65
KJ27000LHPT (6''in 4''out)	3HP Low Head Plus	Yes	38/19 amps	27,000 @ 6' Head	$5107.00
PUMP ACCESSORIES AND REPAIR ITEMS
New! 10-PBVWT	SUPERFALLS NEW PUMP BOX We now have patent pending on our newest addition to the SuperFalls pond equipment line, the most complete line of revolutionary pond and aquaculture equipment available! Order your Safe Pump Box with pumps installed! Discounted price for limited time!		New! See more here!	The pump box is available in ventilated models with bilge pumps, vent fans, hinged lid, grounding strap, AC power supply, DC power supply, remote switching, lights, temperature sensors and monitors, etc. Call! More info coming soon!
New! 10-MAN23P 10-MAN24P 10-MAN255	2" MANIFOLD, 1 spg* port , 3 slip ports  2" MANIFOLD, 2 spg* ports , 4 slip ports  2"MANIFOLD, 2 spg* ports , 5 slip ports		*standard pvc fittings slide over spg port (ie port is same size as pvc pipe), while pvc pipe slides into slip ports. Use Manifolds on suction side of centrifugal pump to route water to pump from several sources, and on discharge of pump to route to several locations.		$29.99 $49.98 $55.00
10-LFT006	6 " DIAM		LEAF TRAP for LH or MH pumps  Giant Leaf Traps available in 3'' and 4'' inlet. for more details click here.	NA	$59.99
10-LFT6TM 10-LFT6IM	6 " DIAM	LEAF TRAP for Tiny Might and Iron Might pumps, same as above, except supplied with required fittings to adapt 1 1/2" inlet and outlet to 1"on Tiny Might and 1 1/2'' on Iron Might.		NA	$69.99 $69.99
10-BP1060	8 1/2" X 15.5"	PLASTIC MOUNTING PLATE 1", SINGLE PUMP		NA	$24.99
10-AOS18C   10-AOS25C	1/8 hp with capacitor   1/4 hp with capacitor	Coming Soon! Replacement low head motor, 1/8 HP, with capacitor (includes 6 ft. cord) 1 year warranty!   Replacement low head motor, 1/4 HP, with capacitor (includes 6 ft cord) More efficient and 2 year warranty!			$249.99   $269.99

Note: All above pumps use the more efficient 1/4 hp motor!

  All models of low head pumps are now available with the new improved, quieter, more energy efficient, permanently lubricated, 1/4 hp motor (see above). 

This curve shows the high flows available with the newest of the Superfalls low amp pumps. Our new model of pump uses a low energy 1/4 hp motor which can be run on 115 volts (as shipped) or on 230 volts if desired. This quiet and efficient motor can be used on the KJ7000LH pump to increase its capabilities.

KOI JOY'S "SUPERFALLS" MEDIUM  HEAD PUMPS

Our medium head pump model SUPERFALLS 10-7000MH uses a 3/4 hp motor to allow a high flow of 7000 gph (115 gpm) at higher pressures. These pumps use less electricity swimming pool or irrigation pumps used by some pond owners and can pay for themselves in energy savings in as little as 6-12 months. At an average monthly cost of $140 / amp / year (charges are actually based on kilowatt-hrs), most consumers can save thousands of dollars by replacing their existing pumps with these energy misers. The 10-7000MH is available in single speed, medium head  or as 10-7000MH-2S (2 speed, medium and low head) for higher efficiency operation.

The high capacity, low head pumps are ideal for up-flow filters, waterfalls, or any high flow recirculation system that doesn't require high pressure. For higher pressure requirements, choose our 3/4 hp SUPERFALLS 10-7000MH. or other higher rated pumps as shown below. Pumps 10-3000LHC thru 10-8000MH are supplied pre-wired with 115 volt cords and plugs, and are furnished with two slip fit unions for easy installation and removal. The model 10-9000MH is available in 115 volt models without cord or plug (have your electrician hard wire or connect the cord for you). 10-9000MH is also available in 230 volt version. All medium head single speed pumps thru 10-125KMH must be wired for 230 Volts, and are shipped without cords or plugs. All pumps (except for the10-1200LH with 1") have 2" inlets and outlets for highest possible performance. Replace your old pump with one or two of these energy misers and get more water for less money.

2 speed medium head pumps are available for use with Predator and other bio-filters which may require high pressure and flows for adequate backwash. Use the low speed for the same energy efficient operation as our low head pumps. 2 speed switches are built into the back of the pump motor for ease of operation.

Our 115 volt pumps (up to 10-8000MH) come pre-wired with a 6 ft, 115 volt cord and plug, and include two slip unions at no extra charge (10-9000MH and all 230 volt pumps do not come pre-wired). Leaf traps for these pumps or any other pump are available for $59.99 each. These large 6" traps have a clear plastic top with large "O" ring for positive seal and are easily opened and closed. The LT-6 has a 2" inlet and 2" outlet. When used with the 10-1200LH, the inlet & outlet must be reduced to 1" with reducers supplied.

SUPERFALLS MEDIUM HEAD PUMPS - FOR 10-50 FT HEAD PRESSURE   SUPERFALLS MEDIUM HEAD 2 SPEED PUMPS - HI SPEED/POWER FOR BACKWASH, LO SPEED/POWER FOR ENERGY EFFICIENCY! Additional info.
MODEL	HP	AMPS @ 115v (230v)	HI SPEED FLOW @ 10'/20'/30' LO SPEED FLOW @ 1'/5'	GALS/AMP	COST
10-7000MH 10-7KMH2S	3/4 HP  1/10 HP	9.8 amps 2.6 amps	84/72/63 45/32	10.0 GPA	$409.99 $509.99
10-8000MH  10-8KMH2S	1 HP     1/8 HP	11 amps 2.9 amps	120/105/95 65/50	11.0 GPA	$459.99  $559.99
10-9000MH  10-9KMH2S	1 1/2 HP     1/4 HP	16.4 (8.0) amps 4.4 (2.6) amps	135/125/115 75/57	9.1 GPA	$489.99  $589.99
10-10KMH1 10-10KMH2	2 HP     1/4 HP	(10.5) amps (2.6) amps	155/145/135 80/64	8.5 GPA	$529.99  $629.99
10-12KMH1  10-12KMH2	3.0 HP 3/8 HP	(11) amps    (2.8) amps	207/190/170 95/71	10 GPA	$619.99  $719.99
10-125KM1  10-125KM2	4.5 HP     1/2 HP	(12) amps  (3.5) amps	220/210/200 110/88	9.6 GPA	$679.99  $779.99
10-LFT006	6 " DIAM		LEAF TRAP for LH or MH pumps.	NA	$59.99
10-BP1060	8 1/2" X 15.5"	PLASTIC MOUNTING PLATE 1", SINGLE PUMP		NA	$24.99

KOI JOY'S NEW "SUPERTRAP" INLINE LEAF TRAP AND STRAINER ASSEMBLY

  Why continue to suffer with frequent leaf trap cleaning, when you can stretch that chore out to as little as 1/8 as often. With the SuperTrap inline leaf trap, you can sit back and enjoy your pond instead of going out every day to empty that little trap that you have.

Daryl is holding the long basket from our "upflow" model of the SuperTrap in one hand, and the much smaller typical trap in use by most pond owners. Our new basket holds up to 8 times a much of the waste material as that little one, and will offer much less resistance to flow than that little one, giving you more flow, less work, and the time that you want to enjoy your work.

The upflow model 04-UFST44 of our 6" SuperTrap,  has a 4" inlet which can be connected directly to the 4" pipe which comes from your 4" bottom drain, and can also be connected directly to skimmers. This unit has a huge 6" removable lid in it's top which can also be used to prime your pump and system if desired. The 4" outlet to the pump is near the top and and provides clean strained water to the pump. The assembly is provided with 4" connections at the bottom (inlet) and at the top (outlet to the pump). The basket is approximately 44" long.

Our Down flow model of SuperTrap should be available soon, with it's inlet near the top, outlet to the coming out of the bottom and rising to the top. This model may be easier to install in earth that is compacted and rocky. It allows for the inlet pipe to be near the surface. 

 Our Back Flush Assembly 04-STBFA4 allows you to clean your leaf trap without removing the basket. When two three way valves are repositioned, the waste is flushed onto the ground, or into our French Drain Assembly 04-STFDA4 with it's drainage and collection basket. When the collection basket has drained, just empty it into the garbage can. 

Access Boxes

KOI JOY'S IN-LINE AND TOP-MOUNT VENT FAN

INLET STRAINER

The Inlet Strainer is constructed of 2'' Perforated pipe ( for minimal restriction) a Tee and 2 caps. Available with a check valve for pumps that are not self priming. Approximately 3 1/2 feet across to allow a large surface area which cannot easily clog or become obstructed. Perfect for a pond that was not originally built with a bottom drain when adding a centrifugal pump. Install at the bottom of the pond, over the side, or by penetrating the liner with an elbow and appropriate length pipe.  

REPLACEMENT MOTORS

REPLACEMENT WET ENDS

RETURN TO PUMPS 

JACUZZI SELF PRIMING MEDIUM HEAD PUMPS

This popular line of centrifugal pumps is self-priming to 10 feet. Order one of these pumps if you can't install your pump at or near the water level in your pond. The Jacuzzi pump, while not extremely efficient, does have some qualities. The pump, recommended by some filter manufacturers works well for medium head or pressure sand type filters.

Pumps are available for all sizes of filters. Please call.

SUPERFALLS SUBMERSIBLE PUMPS 

SUBMERSIBLE PUMPS: KOI JOY has several models of SUPERFALLS super energy efficient in-pond pumps ranging from our 1/2 hp 10-15KLHV and 10-24KLHV stainless steel models (2) with flows to 400 gpm at 10amps. We have larger models to 10 hp with flows to 1000 gpm. Standard pumps come with 30 ft lead. These pumps are available in vertical models or horizontal models, 10-15KLHH and 10-24KLHH.

Note that the pumps are available in Horizontal or Vertical configurations. Horizontal model allows use in shallow ponds. Select the correct size of impeller for the pump according to required flow rate at the pressure (elevation) required. Generally, impeller #1 offers a wider range of operating flow and pressures, while impeller #2 offers higher flow rates at lower heights and pressures. The larger impeller also costs an additional $56.00.

Unlike our centrifugal pumps, the amps on these pumps increases as the flow decreases. This means that the greatest flow and efficiency occurs at the lowest pressure for each impeller. These pumps are available in 115 VAC or 230 VAC models.  Add $200 for 230 VAC models.

Protective enclosure screens are available for the Vertical model pumps in either Aluminum screen, or PVC and HDPE materials. Horizontal pump model must be protected with PVC and HDPE enclosure.

1/2 HP SUPERFALLS SUBMERSIBLE PUMPS

• High quality, Mag-Driven,corrosion resistant ceramic bearings help ensure quiet operation and longer life.

• Small footprint, with energy-efficient motor, and high-flow rates..

• Innovative "cooling chambers" provide air-cooling during dry use and water-cooling in wet applications.

• Easily serviced in the field.

• 115V 60 Hz 

• UL, cUL, CE, TUV-Gs Listed.

• Safe for salt or fresh water use.

• Quiet operation…noise level less than 45 decibels.

• Patented Uni-Direction impeller eliminates need for noisy mechanical device. This allows the pump to always turn in the correct direction immediately.

• Fountain Adapters included.

• 20 foot cord.

New! PONDMASTER SUBMERSIBLE PUMPS

               Pondmaster Submersible Mag-Drive Pumps are specifically designed for the demands of a pond, unlike most other pumps on the market. Mag-Drive pumps are made to run continuously, without seals to wear out. Highly energy efficient, using half the electricity of other pumps, the savings pass on to the consumer. Being filled with epoxy, not oil, they can not leak oil into the pond. All Pondmaster pumps are suitable for statuary, fountains, ponds, and/or aquariums.

New! PONDMASTER FOUNTAIN HEADS

New! SUPERFALLS SUBMERSIBLE WATERFALL PUMPS

   SUPERFALLS ECO PROJECT  Submersible Waterfall Pumps introduces six Direct-Drive water pumps specifically designed for high flow and maximum pumping height. Made in Italy for SuperFalls, these pumps are epoxy encapsulated, rather than oil-filled, to be fish safe. With capacities from 3325 to 5300 gallons per hour and maximum pumping height to over 45 feet, these pumps are ideal for waterfalls in medium to large ponds. Our pumps are built with ceramic bearing surfaces, so they are rated for continuous duty. The built-in bottom pick-up can pass 3/8th inch solids with no damage. The 3 large pumps discharges are female pipe threaded, and come with adapter elbows for 1 1/4" tubing for more versatility. 

Optional fittings to connect to 1 1/2" or 2" rigid pipe or hose PVC are available if desired (see items 10-114150 and  10-114200 below). Our new waterfall pumps continue the tradition of supplying the best available pond pumps, built to last, affordably.

SUBMERSIBLE PUMP PROTECTOR

Protects submerged pumps Allows water circulation   Black netting reduces visibility Protects pumps from large debris 1' Diameter For added protection add a 2' piece of Bio-Filter padding wrapped around the inside of the bag   and a 1' diameter bio-filter pad sitting at the bottom of the bag for only          10-PP0100       Pump Protector Bag without filter media $14.99 10-PPFPM1  Pump Protector bag with filter Media   $30.98

New! SUPERFALLS  3 OUTLET GFCI EXTENSION CORD

4-OUTLET GFCI POWER BOX The 4-Outlet GFCI Power Box has a lighted circuit breaker switch that indicates power is on. It is constructed of sturdy plastic for years of trouble-free use, has a 6' heavy-duty, 12 gauge power cord and 4 covered GFCI protected outlets. It provides portable protection on tools, appliances, outdoor equipment, etc. and is great for the jobsite, workshop or at the marina.  $72.99 ea.

PONDMASTER 3 OUTLET GFCI EXTENSION CORD

FLO-TEC SUBMERSIBLE PUMP

This Hi Performance submersible pump is capable of handling 2'' solids. Ideal for basement installations, pumping below grade toilets, laundry facilities, and waterfalls. It's many features include heavy-duty cast iron construction, a high efficiency motor with overload protection, strong long lasting 1/2 hp motor, and it's non-clogging vortex type impeller. Originally designed for pumping sewage, this pump includes by-pass float switch for automatic or manual operation and 10' cord for easy installation. It's 2'' discharge makes it very useful for ponds, and meets standard approvals. Maximum pumping capacity up to 9000 gallons per hour. Like most pumps of it's type, this pump does contain a non-toxic oil for cooling. NOTE: If no power supply is available, refer to the gas driven pond service pumps below, item #s 10-PSP300 and 10-PSP450.

NEW! PORTABLE WASHDOWN and FIRE FIGHTING PUMP

This high pressure, portable, engine-drive pump is capable of running multiple lines for firefighting and washdown applications. The pump is self priming after filling pump chamber first time. The heavy-duty aluminum casing construction make this pump the first choice for an emergency pump for protection of farms, or remote sites such as homes, ranches, construction sites, etc. Special features and capabilities are: Multiple discharges 1'', 1 1/2'' and 2''.Use for water transfer, equipment washdown, emergency fire pumping, etc.  See fire and suction hose below.

                                                                       PUMP PERFORMANCE     

NEW! FIRE HOSE KIT

Ideal for emergency fire fighting or general uses such as washing down farm equipment. The kit comes complete with 50 ft of 1 1/2'' collapsible hose with quick connect 1 1/2'' female fitting for easy attachment to the pump. Also included is an adjustable nozzle rated at 40 gallons per minute at 60 pounds of pressure. Available in 1 1/2" and soon 2" sizes.

NEW! SUCTION HOSE KIT

NEW! POND SERVICE PUMPS

The POND SERVICE PUMP may be used for fire protection, pond maintenance, or any occasion you may need to move large amounts of water, where power is not available.      

FEATURES:

HEAVY DUTY, CAST IRON CASE: will service even the most rugged applications. 

SELF PRIMING: Self Priming pump with built in check valve to prevent backflow and loss of prime. The check valve provides an effective seal for fast priming.

NON CLOGGING, SEMI OPEN, CAST IRON IMPELLER: less likely to clog than others, and able to handle abrasive solutions.

MECHANICAL SEAL: ensures leak proof fit and continuous lubrication.

GAS DRIVEN COMMERCIAL GRADE TECUMSEH OHV ENGINE: with cast iron cylinder sleeves and dual element air filters for long life in tough environments.

Catalog  Filtration & Supplies UV & Ozone Pumps Air Compressors, etc. Construction Mat'ls Pond  Maintenance Seasonal Protection Miscellaneous Pond Treatments Medications, etc. Best Foods Koi by the Box Books, Videos, etc. Yard & Deck Products Meters & Instruments Energy Saving Products Lighting, Fountains and Special Effects Financing Available (90 days same as cash)   Koi Joy's Gift Shop     Important Reference and other Neat Stuff! Place or Track an Order Reduce Energy Costs Medical Diagnoser (soon) Pond Planner/Calculator  (soon) New Products & Specials About Koi Joy SuperPond Products Book & Magazine Reviews Feedback Problems & Solutions On-Line-Mall.com World Wide Ponds

About KOI JOY | © Copyright 1996

Top of Page

     Technical Help / Orders (509)-586-1945  

Orders only 1-800-497-3627 24 hours a day

Return to Previous

About KOI JOY | © Copyright 1996 

ABOUT PUMPS

Top of Page